6/6/2023 0 Comments Ctivo apple tv formatIf it doesn't support it, that means the audio format is limited to Dolby Digital, and you won't get the same sound experience. If the receiver says 'ATMOS', it means the TV can pass Dolby Atmos signals. We make sure all the eARC settings are on, and we play an audio file in the Dolby Atmos format. To test for Dolby Atmos via TrueHD passthrough via eARC, we connect a PC to the TV via HDMI, and we connect a Sony STR-DH790 receiver in the ARC port. It means that the test is only valid if you're watching Blu-rays in Dolby Atmos and not streaming apps with Dolby Digital Plus. Dolby Atmos is used with UltraHD Blu-rays, while streaming apps use a lossy version called Dolby Digital Plus, which means that the sound is more compressed and isn't as good as the lossless version. The audio signal transmits from the sources to the TV, and then the TV sends the audio down to the receiver.ĭepending on the number of sources you have and whether they all support the signal types you want to use, this kind of setup can eliminate several extra cables without any noticeable impact on sound quality.ĭolby Atmos via Dolby TrueHD passthrough via eARC capability means a TV can accept a Dolby Atmos signal from a source device, when Dolby TrueHD is used as the carrier signal, and then pass that along to the receiver over an HDMI cable. With passthrough, instead of needing to connect a separate wire from each source to the AV receiver for the audio signal to make it to the receiver, a single audio connection is established between the TV and the receiver via HDMI. In a typical setup, multiple source devices will connect to the TV via HDMI, a cable that can transmit both video and audio. If you connect an HDMI 2.1 gaming console to an HDMI 2.0 receiver, you're losing the advantage of HDMI 2.1 bandwidth. With more and more TVs supporting HDMI 2.1 bandwidth and variable refresh rate (VRR) support, you can take advantage of those features with your gaming console connected to the TV and the TV sending high-quality audio to the receiver. While you can connect your sources to your receiver and pass audio to the TV, connecting those sources directly to the TV has its benefits, especially if you're a gamer. ![]() ![]() Since ARC over HDMI sends and receives audio and video signals, you only need one wire between the receiver and TV.Īdvantage of connecting sources to the TV ![]() However, this is only beneficial if none of the sources are new gaming consoles because you can't take advantage of the console's features if you connect it to a soundbar or receiver. You can either connect the sources directly to the TV if you have a soundbar with one HDMI input, or if you have a receiver with multiple HDMI slots, you can connect all your sources to that instead. Here are a couple of examples of home entertainment setups that take advantage of a TV's audio passthrough. It also means you can connect sources directly to the TV for the best video experience, while the TV passes on the audio duties to the receiver. In short, passthrough is just an option that allows you to get surround sound for multiple source devices with fewer cables. A 5.1 setup is one of the different configurations you can have, and it's used more with Dolby Digital and DTS signals, while newer formats like Dolby Atmos and DTS:X use more speakers, like 7.1, 5.1.4, etc. You can see that two cables are going to the TV - one for the video and one for the audio. ![]() This image is an example of a 5.1 surround sound setup with a TV that doesn’t support passthrough. You can still get the same audio-video experience without passthrough, but you'll have more wires going to and from your TV. Passthrough isn’t a necessity, and it's only important if you have a surround sound setup or a dedicated soundbar. If you use the TV’s speakers, you don’t need to worry about passthrough because sound is played from the TV directly. At least one source device capable of outputting an audio signal.A speaker system with an HDMI ARC or Digital Optical output.Passthrough is only helpful when you have the following: It's important to have a TV that supports passthrough if you watch movies with these audio formats, like Blu-rays that tend to have DTS:X audio. Most TVs support some sort of audio passthrough over ARC and Digital Optical connections, while more TVs are starting to come out with eARC support for lossless Dolby Atmos and DTS:X signals. Some TVs can only pass audio when it's in a certain format (DTS or Dolby), while others can pass both audio formats.
0 Comments
Leave a Reply. |